The Build

Chainspike said:



Custom painted the front screen cover.
Click to expand...

g8ADEQI.gif

0WSiC
 
Last edited:




All the tubes are bent and in... I also made sure all my monsoon fittings were using the upgraded poly carbonate lock rings, I guess the acrylic ones were cracking and leaking on users. I also finished the wiring.

Update** 24 hour leak check spotted a small drip from the #2 pump housing. I was unable to get it to stop by trying to tighten it a little so I had to drain the system and remove the pump. I checked the oring and mating surface, both of which looked good. Took me 2 trys at reseating the housing but on the second try it stopped and hasn't dripped yet. If it continues to drip, then I am going to contact monsoon about getting a new o-ring.
 
That's why I keep spares. I bought a pack of 2 for extras and ended up needing one of them and they're cheap so it's good to have on hand. Almost there!
 


testing things while I work out air in the system and leak check. So far the leak has not come back and I've been running it now for quite a few hours. This works though haha.
 
You must log in or register to reply here.
Back
Top